The little brother of the SD-10G Based on the design of the high-end transmitter SD-10G, the SD-5G features all important functions for hobby pilots.
Extremely user friendly The setup structure of the SD-5G is perfectly thought-out. All functions can be reached and set up quickly.   Best value for money
The SD-5G offers lots of flight fun, professional adjustability and is an absolutely full-fledged flight transmitter – and all this with a sensational price performance ratio.

RX-600 6-channel receiver (F.H.S.S., 2.4GHz) included.

Sanwa SD-5G 5-channel 2.4GHz Mode 1 Read more >>

Sanwa SD-5G 5-channel 2.4GHz Mode 2 Read more >>

The first charger with touch screen, now in stock!

CHARGE LiPo - LiFePo - NiMh - NiCd • Adjustable fast charge from 0.1 to 12.0A 1-4 cells LiPo/LiFePo with automatic (LiPo/LiFePo) cut-off 1-8 cells (NiMH/NiCd) with adjustable Delta-Peak detection, linear or optional 5-step charge mode. (charging with variable current steps)
• Autostart-Timer for maximum comfort 
• Storage Mode: The battery is charged/discharged automatically for longest cell lifetime   CYCLE LiPo - LiFePo - NiMh - NiCd • Automatic Cycling Mode (Discharge - Charge - Discharge) for perfect conditioning of your batteries.   DISCHARGE LiPo - LiFePo - NiMh - NiCd
• Adjustable high-power discharge current (up to 20.0A) and cut-off voltage to perfectly match your batteries.

• Touch screen Graphic Display, blue backlit
• Integrated LiPo/LiFePo Balancer: The Balancer is specially developed for the use with LiPo and LiFePo batteries. It automatically detects cell condition for all 2- up to 4 cell batteries. If the difference between the cells is more than 5mV, the balancing starts automatically.
• Brushless motor sensor port: for sensor check and rpm measurement
• Receiver simulator port: for function check of speed controls and servos
• Fully Adjustable: Intuitive program structure with graphical user interface, allows precise adjustment of all parameters
• User Profile Memory: 5 factory pre-set profiles which can be customised, renamed and saved in memory
• USB connection (wire included): for data download to PC and firmware update
• Microprocessor controlled: Fully adjustable for perfect operation, maximum performance and highest safety
• Multi Protection System: 100% protection against output reverse polarity, short circuit, input voltage error and over charge.
• Voltage calibration for maximum accuracy
• DC Input 11-15V

Pulsar Touch Competition Read more >>

7,4 Volt, 25C, 2S Stickpacks with Traxxas connector.

3000 mAh:

Robitronic LiPo Stick Pack, 3000mAh, 25C, 7.4V, 2S, Traxxas conn Read more >>

4100 mAh:

Robitronic LiPo Stick Pack, 4100mAh 25C, 7.4V, 2S, Traxxas conne Read more >>

Features
imaxRC B6 Pro multi-functional balance charge is a rapid charger with a high performance MCU.
Optimized user interface
When charging or discharging, B6 Pro  has an “AUTO” function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging that can lead to an explosion by user’s fault. Every program in the unit is controlled with mutual links and communication for every possible error for maximum safety. These can be set at user’s option.
Special recharge plugs port for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc.
It provides most convenient balance port for Lithium batteries, with separated 2,3,4,5,6 charge port, and external reverse connector.
High-power and high-performance circuit
B6 Pro  employs the circuit that has maximum output power of 50W. As a result it can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program.
Individual voltage balance for Lithium batteries inside
B6 Pro  has an individual-cell-voltage balancer inside. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage balancing.
Balance individual cells on discharge
B6 Pro  also can monitor and balance individual cells of the Lithium battery pack during the discharge progress. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Suitable for various types of Lithium batteries
B6 Pro  can accept three types of Lithium batteries-Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer “Warnings and safety notes” section.
Lithium battery “Fast” and “Storage” mode
You can charge Lithium battery for special purposes. “Fast” charge reduces the charging time of Lithium battery and “Storage” mode controls the final voltage of the battery to be suit for long time storage.
Maximum safety
Delta-peak sensitivity: the automatic charge termination program works on the principle of the Delta-peak voltage detection.
Auto-charge current linit: when charging Nicd or NiMH at “AUTO” current mode, you can set the upper limit of charge current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in “AUTO” mode.
Capacity limit: the charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Temperature limit: the temperature of the battery on charging will rise by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has reached.
Processing time limit: you can also restrain the maximum process time to prevent from any possible defect.
Input power monitor: to protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.
Data store/load
For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
Cyclic charging/discharging
Perform 1 to 5 of charge/discharge or discharge/charge continually for battery refreshing and balancing.
PC based analysis using USB communication
For technical expert, B6 Pro  offers PC based program can analysis the characteristic of the battery by USB adaptor. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.(*PC analysis software and USB adaptor, link wire are not included, sold separately.)
Multi-use wires
Five kinds of wires are provided with the B6 charger. You can charge and discharge your battery easily with these wires.
B6 AC Pro  Specification:
*Input voltage:  AC110/240 *Charge current:0.1-5A,0.1A step
*Discharge current:0.1-1A,0.1A step
*Nicd/NiMH Cells:1-15Cell
*Li-Ion/Li-Po/Li-Fe Cells:1-6Cell
*Lead-acid(Pb):2-20V
*Temperature sensor & USB enable *Balance:2-6Cell *Case: plastic
*Display: 16*2 character LCD

iMax B6 AC Pro Balance Charger, 220V Read more >>

With the new A2-STX Pro 2.4GHz transmitter LRP offers a high value for money transmitter with 2.4GHz technology for all R/C drivers. With its high-end features, this new transmitter is nothing less than a sensational price/performance package.

The little brother of the successful C3-STX 2.4GHz Pro impresses with its 2.4GHz system through extremely high reliability and transmission security. Problems with occupied frequencies are now finally a thing of the past! 

Features: •  Crystal- And Interference-Free 2.4GHz Technology: Due to the 2.4GHz technology you do not need to worry any longer about radio interferences. Problems with busy frequencies are history! •  End Point Adjustment (EPA)EPA adjusts the maximum angle causing a different turning radius. It is used to adjust the maximum servo travel for each channel and turning direction in order to protect your servos against damages due to overturning of the servo above the technical limited servo travel of your vehicle. •  Fail Safe Function FailSafe sets channel 2 to an upfront defined position in case of a weak or lost radio signal in order to  avoid loosing control of your vehicle. If no pre-setting is done Failsafe is set to neutral position. •  LRP Quality in a complete package -  New 2.4GHz technology -  2.4GHz Mini 2-channel receiver -  LED battery status -  Ergonomically grip and steering wheel in pistol grip design -  Outstanding price/performance ratio -  Charge socket for optional rechargeable batteries -  Stylish packaging box

LRP A2-STX Pro 2.4GHz Radio Set Read more >>